Razni hardverski problemi

"not optimum mode - recommended 1280 x 1024 60Hz"

kompotko pon 21.7.2008 16:01
ajzak kaže...

"not optimum mode - recommended 1280 x 1024 60Hz"

e to mi se pojavljuje stalno kada upalim racunar samo crno i prozorcic mali kruz, sta da radim? imam Samsung 710n monitor

 Stavio si previsoku rezoluciju. Preporučena ti je bila 1280x1024, a ti si očito stavio višu.
ajzak pon 21.7.2008 17:45

http://www.youtube.com/watch?v=hx6tAg0fKf0

eo lik ima isti problem

i dole pise ovo

moze li iko prevesti

 

1. Turn Off Monitor by pressing power button on LCD
2. Shut down computer
3. Unplug power cable from LCD, Once power cable is unplugged from LCD, press and hold down the power button on LCD for 15 seconds

4. Unplug the power cable from the back of Desktop Computer and Hold down the power button on desktop computer for 15 seconds

5. Plug the power cables back into the LCD and Desktop Computer

6. Power on computer and then power on LCD, it should work

kompotko pon 21.7.2008 18:04
ajzak kaže...

http://www.youtube.com/watch?v=hx6tAg0fKf0

eo lik ima isti problem

i dole pise ovo

moze li iko prevesti

 

1. Turn Off Monitor by pressing power button on LCD
2. Shut down computer
3. Unplug power cable from LCD, Once power cable is unplugged from LCD, press and hold down the power button on LCD for 15 seconds

4. Unplug the power cable from the back of Desktop Computer and Hold down the power button on desktop computer for 15 seconds

5. Plug the power cables back into the LCD and Desktop Computer

6. Power on computer and then power on LCD, it should work

 1. Ugasi monitor preko gumba.
2. Ugasi računalo (ručno)
3. Iskopčaj kabel monitora. Kad je kabel iskopčan, pritišči gumb za uključivanje 15 sekundi.
4. Iskopčaj kabel računala. Pritišči gumb za uključivanje 15 sekundi.
5. Ukopčaj kabele monitora i računala.
6. Uključi komp, pa monitor.
boxer pon 21.7.2008 18:13
kompotko kaže...
ajzak kaže...

http://www.youtube.com/watch?v=hx6tAg0fKf0

eo lik ima isti problem

i dole pise ovo

moze li iko prevesti

 

1. Turn Off Monitor by pressing power button on LCD
2. Shut down computer
3. Unplug power cable from LCD, Once power cable is unplugged from LCD, press and hold down the power button on LCD for 15 seconds

4. Unplug the power cable from the back of Desktop Computer and Hold down the power button on desktop computer for 15 seconds

5. Plug the power cables back into the LCD and Desktop Computer

6. Power on computer and then power on LCD, it should work

 1. Ugasi monitor preko gumba.
2. Ugasi računalo (ručno)
3. Iskopčaj kabel monitora. Kad je kabel iskopčan, pritišči gumb za uključivanje 15 sekundi.
4. Iskopčaj kabel računala. Pritišči gumb za uključivanje 15 sekundi.
5. Ukopčaj kabele monitora i računala.
6. Uključi komp, pa monitor.
Ispravka, sorry-- Ne pritiskati, nego pritisnuti dugme 15 sekundi.
Bas me zanima kakav to efekt ima pritisnuto dugme za paljenje kompa 15 sekundi dok je kabal od napajanja izvadjen iz napajanja???? Dakle nema struje u kompu, a ti cuvas pritisnuto dugme za paljenje? Hebiga, meni malo cudno? Sorry na offtopicu...

Nova tema

Nova poruka u temi

Novi komentar na sadržaj

Odgovor na poruku

Uređivanje poruke

    Dodaj slike (max 5MB)