pozzz

imam windows 7 i idem instalirati adapter i pise da na podrzava windows eli zna ko rjesenje

NA WINDOWS XP MI JE NORMALNO RADILO A NA WINDOWS 7 NE MOZE

PLS HELP

HVALLA

HITNO!!!!!!

???????

Četiri minute si čekao i nitko ti nije odgovorio?!? Baš grozno...

A koristio si i velika slova, no ni to nije pomoglo?

Za ovakve stvari suspendiramo forumaše i brišeme teme, pa u buduće poštuj pravila foruma!

Slucajno imam D-Link DWL-G122 usb wireless adapter i uredno radi na Windows 7-ici. Samo ga ustekaj i Eindows ce ti povuci driver sa neta. Radi provjereno.

Evo kako instalirati neke D-linkove wireless kartice na Visti slićna procedura je i za windows 7.
Wireles kartica na koje sa to odnosi:
DGL-3420 / DWL-AG132 / DWL-AG530 / DWL-AG660 / DWL-G120 / DWL-G122 / DWL-G132 / DWL-G510 / DWL-G520 / DWL-G520M / DWL-G550 / DWL-G630 / DWL-G650 / DWL-G650M / DWL-G680 / DWL-G710 / DWL-G820 / WDA-1320 / WDA-2320 / WNA-1330 / WNA-2330 / WUA-1340 / WUA-2340 / DWA-142 / DWA-542 / DWA-552 / DWA-556 /DWA-642 / DWA-643 / DWA-645 / DWA-652 /DWL-M60AT / DWL-R60AT / DVG-G1402S / WBR-1310 / WBR-2310

Note: The following steps are only a suggestion. D-Link cannot guarantee that the following steps will work in every situation.

Step 1: Physically install the network adapter.

Step 2: Boot the computer. Wait for Vista to recognize the new hardware. Once it prompts you to locate the driver. Click Locate And Install Driver Software (Recommended).
 
Step 3: If Vista fails to locate the drivers internally or online, it will prompt you to insert the Driver Disk.
 
Step 4: Once the disk is inserted the Vista will locate the driver from the CD and install it. Click Next to continue.
  
Step 5: After the drivers are installed, Vista will tell you the card has installed properly and is ready to use. You should not have to reboot.
 
Alternate Installation Method:

Step 1: Click Start then Control Panel.
 
Step 2: Locate the Device Manager.
 
Step 3: Click the plus sign next to the Other Devices. This will display a sub-menu.
 
Step 4: Right click the Network Controller, and select Update Drivers.
 
Step 5: Select Search Automaticly For Updated Driver Software. Ensure that the driver CD is inserted in your machine as Vista will automaticly check for it there.
 
Step 6: After the driver is installed, click Close.
 
Note: Vista requires that you use its utility for wireless management. You cannot use the D-Link utility.

evo ga uspio sam

ali opet mi se javlja drugi problem

ja uopce ne gasim internet a kad upalim komp onda mi je internet u gašen ili usred koristenja internetom ugasi mi se internet ????

kako rjesiti to da li zna itko

HVALA

EJ DE MI RECI KAKO INSTALIRATI  D-LINK-120+  HITNO